Medcaptain mp30 user manual

  • このトピックは空です。
1件の投稿を表示中 - 1 - 1件目 (全1件中)
  • 投稿者
    投稿
  • #9562
    Laiho
    ゲスト

    .
    .
    Download / Read Online Medcaptain mp30 user manual >>
    http://www.vhg.file9.su/download?file=medcaptain+mp30+user+manual
    .
    .
    .

    <br>
    <br>
    <br>
    <br>
    <br>
    <br>
    <br>
    <br>
    <br>
    <br>
    .
    No catalogs are available for this product. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates. MEDCAPTAIN MEDICAL TECHNOLOGYCO. Top element. MEDCAPTAIN MEDICAL TECHNOLOGYCO. MEDCAPTAIN reserves the right for final interpretation of this Service Manual. MEDCAPTAIN reserves the right to modify the contents of this service manual for a more accurate and effective service quality. The modified contents should be reflected in the newly published service manual version. After Service Thank you for using the infusion pump of MEDCAPTAIN MEDICAL TECHNOLOGY CO. The voltage of supply network exceeds the range. RODUCT EATURES PRECAUTIONS FOR USE . URNING THE OWER SETTING THE INFUSION PUMP . ONNECTING A BARCODE SCANNER OPTIONAL 7. NVIRONMENTAL ROTECTION AND ECOVERY INFUSION ACCURACY CHARACTERISTICS . APPENDIX B THE DEFAULT FACTORY SETTINGS . APPENDIX CTOXIC AND HAZARDOUS SUBSTANCES OR ELEMENTS . It ensures constant infusion speed and accurate dosing volume during longtime infusion. Independent motor driving CPU and motor subdivided drive chip design. Setting and giving automatic prompt of maintenance interval. Precautions For Use 2 Precautions for Use In this manual, precautions are classified into warning and caution according to the importance. The information is about safety and efficiency. Operation against the warning may cause injuries. There is no patient circuit in this device. The output of the equipment is not allowed to be accessible to patient. The infusion set is treated as the applied part of the pump. Do not operate on the display with sharp objects. Otherwise, the display may be damaged. Precautions For Use occlusionwhen sensor failed. The delay time between the onset of the alarm condition and the representation of the alarm is no longer than 150ms. Do not dispose this product as unsorted municipal waste. Input the patient information by barcode canning Connect infusion workstation, nurse pager, voice communication WIFI function. Replaceable battery inside the chamber. Product Description it is difficult to operate the disconnection device. List of Optional Accessories Options. Before using the infusion pump, read carefully the Operation Manual and precautions in this manual. When using the infusion pump for the first time, set up the date and time to ensure that history can be recorded correctly. Operating Instructions 6 Operating Instructions 6. The more bars displayed, the larger pressure it is. Screenlock symbol, consists of lock and unlock. Infusion set, Local set, History and Interconnect set. Refer to Chapter 8 Troubleshooting. Ensure the displayed IV set brand corresponds with the using IV set brand. To ensure the accuracy of drop detection, the drop sensor should be installed as far as possible close to the down liquid level. Before purging the IV line, ensure that the IV line is not connected to patients. Ensure liquid has run out from the needle before stopping purging. Infusion can only start when the recipe value equals to the set value. Operating Instructions Bolus rates are different depending on the IV set specification as follows. After the pump is shutdown, all parameter settings will be automatically saved. Parts of parameters will not be saved in force shutdown. Weight mode Under the WeightMode, set the Conc, DoseRate, Weight and VTBI, the device will calculate the rate automatically. Manual Bolus, Rapid quantitative Bolus and Automatic Bolus. If disconnected the drop sensor but the drip mode is open, the pump produces no drop sensor alarm. There are seven different color options for UI type. All the parameters of the night mode could be adjusted here. The pump could communicate with working station, and the working station could manage the alarm and implement relay function between pumps. Once the frequently used infusion modes are chosen, the unnecessary modes will not appear in the list of 7. Choose the measurement unit for the pressure. Set the date, time, and their format. History records Event Record Parameters Start up Occurred time Shutdown Occurred time Standby Occurred time, standby set time Start Occurred time, rate, VTBI Bolus Occurred time, Bolus rate, Bolus way Bolus stop Occurred time, Bolus rate, Bolus accumulated volume Stop. Four bars light Operation will be possible for 300 minutes. Three bars light Operation will be possible for 210 minutes. Two bars light Operation will be possible for 140 minutes. Troubleshooting 8 Troubleshooting 8. Alarm The infusion pump provides users with a variety of status information about itself and its injection process. If any abnormality is detected, the infusion pump sounds an alarm and notes users in the form of sound, light, and character. All the alarms on this pump are the technical type alarm. The drop sensor detection Install the drop se filexlib.
    .
    Medcaptain mp30 bedienungsanleitung <br> Medcaptain mp30 gebruiksaanwijzing<br>Medcaptain mp30 handbok <br> Medcaptain mp30 mode d'emploi<br>Medcaptain mp30 instruction

1件の投稿を表示中 - 1 - 1件目 (全1件中)
  • このトピックに返信するにはログインが必要です。